1. Kumar L, Kumar S, Dogra PN, Kaushal S, Panaiyadiyan S, Jain S et al (2019) Robotic excision of upper ureteral fibroepithelial polyp presenting as pelviureteral junction obstruction: surgical surprise with review of literature. Journal of Endourology Case Reports 2019;X:X, 1–5, DOI: 10.1089/cren.2019.0088.
2. Kumar L, Jain S, Kaushal S, Seth A, Goel R, Kumar M, Kumar S. A case of type 1 papillary renal cell cancer with pelvic tumor thrombus masquerading as urothelial cancer with review of literature. Journal of Endourology Case Reports 2019;X:X, 1–4, DOI: 10.1089/cren.2019.0056.
3. Bansal D, Kumar S, Jain S. ‘Poles apart presentation’: diagnosis and management of iatrogenic posterior urethral false tract in cases of pelvic fracture urethral injury. British Medical Journal of Case Report. 2019;12:e231166. doi:10.1136/bcr-2019- 231166.
4. Dadhwal R, Jain S, Seth A. Neuroendocrine tumour of urinary bladder: a rare case of aggressively behaving primary well- differentiated neuroendocrine tumour with review of literature British Medical Journal of Case Report. 2019;12:e231061. doi:10.1136/bcr-2019- 231061
5. Nayyar R, Jain S, Sharma K, Pethe S, Kumar PA Novel Anterior Bladder Tube for Traumatic Bladder Neck Contracturein Females: Initial Results. Urology. 2020 Feb 13. pii: S0090-4295(20)30161-8. doi:10.1016/j.urology.2019.12.037. 
6. Nayyar R, Bansal D , Singh P, Jain S, Seth A. Individualised management of obliterative urethral stricture in female patients – four patients and four management strategies. Journal of Clinical Urology.2020;1–6. DOI: 10.1177/2051415819897223.
7. Jain S, Kumar A.How to diagnose and manage tubercular epididymitis and prostatitis. British J Urol Int Knowledge. 2017 May;10.18591/BJUIK.0559.
8. Jain S.Overview of reconstructive and sperm retrieval surgeries in male subfertility. Fertil Sci Res 2016;3:63-5.
9. Kumar S, Jain S, Singh SK, Mandal AK, Lal A, Badhada S.Mp82-05 An assessment of Serum Testosterone, Serum Estrogen, Vitamin D and Bone Mineral Density in Adult Idiopathic Calcigerous Renal Stone Formers. J Urol.  2016 apr;195(4): e1074.
10. Kumar S, Singh S, Jain S, Bora G. Robot-assisted heminephrectomy for chromophobe renal cell carcinoma in L-shaped fused crossed ectopia: Surgical challenge. Korean J Urol. 2015 Oct;56(10):729-32.
11. Kumar S, Shankeregowda SA, Dewana SK, Jain S, Singh SK Single-incision multiport laparoendoscopic technique to repair retrocaval ureter using the Santosh PGI ureteric tacking fixation technique. Asian J Endosc Surg. 2014 Nov;7(4):337-41.
12. Chintamani, Tuteja A, Khandelwal R, Tandon M, Bamal R, Jain S. Patient and provider delays in patients attending tertiary care centre: a prospective study J R Soc Med Sh Rep 2011;2;76.
13. Chintamani, Gogne A, Khandelwal R, Tandon M, Jain S, Kumar Y. The correlation of anxiety and depression levels with response to neoadjuvant chemotherapy in patients with breast cancer. J R Soc Med Sh Rep 2010;1:49.
14. Mohil R, Narayan N, Narayan A, Kerketta Z, Jain S, Bhatnagar D. Life threatening lower gastrointestinal haemorrage from an aneurysm of the right hepatic artery: a rare case presentation due to delayed rupture. The internet journal of surgery 2010 vol 24 (1).
15. Chintamani, Singh JP, Tandon M, Khandelwal R, Aeron T, Jain S. Vulval elephantiasis as a result of tubercular lymphadenitis: two case reports. J R Soc Med Sh Rep 2010;4:369.
16. Chintamani, Sugandhi N, Khandelwal R, Tandon M, Jain S, Narayan N. Kimuras disease masquerading as parotid malignancy. J R Soc Med Sh Rep 2010;1:41.
17. Chintamani, Khandelwal R, Tandon M, Jain S. Liposarcoma of the spermatic cord: a diagnostic dilemma. J R Soc Med Sh Rep 2010;1;49.

1. Kumar S, Tomar V, Yadav SS, et al. Primary Squamous Cell Carcinoma of Kidney Associated With Large Calculus in Non-functioning Kidney: A Case Report.Urol Case Rep. 2016 May 31;8:4-6.
2. Kumar S, Tomar V, Yadav SS , et al. Fertility Potential in Adult Hypospadias.J Clin Diagn Res. 2016 Aug;10(8):PC01-5.
3. Yadav SS, Agarwal N, Kumar S, et al .Single-stage Female Epispadias Repair by Combined Infrasymphyseal Bladder Neck Plication and Urethrogenitoplasty: A Novel Technique.Urology. 2017 Feb;100:240-245.
4. Bansal D, Kumar S, Jain S et al. "‘Poles Apart Presentation’ – Diagnosis and Management of Iatrogenic Posterior Urethral False Tract in Cases of Pelvic Fracture Urethral Injury". BMJ Case Report.2019 Aug;12(8):e231166
5. Kumar L, Jain S, Kumar S et al. “A Case of Type 1 Papillary Renal Cell Cancer with Pelvic Tumor Thrombus Masquerading as Urothelial Cancer with Review of Literature”.Journal of Endourology Case Reports.2019 Dec;5(4):1-4
6. Kumar L, Kumar S, Dogra P N et al. “Robotic Excision of Upper Ureteral Fibroepithelial Polyp Presenting as Pelviureteral Junction Obstruction: Surgical Surprise with Review of Literature”Journal of Endourology case Reports.2020 March;6(1):30-34.
7. Arora S, Kumar S, Das CJ et al. Inguinal Canal Deposit—An Uncommon Site of Metastases in Carcinoma Prostate Detected on 68Ga–Prostate-Specific Membrane Antigen PET/CT. Clinical Nuclear Medicine.2020 Aug;45: e443-e444.
8. ShobhanaR,Sharma A, Patel C, Sahoo R, Das CJ, Kumar S,et al. Is there a utility of adding skeletal imaging to 68-Ga-prostate-specific membrane antigen-PET/computed tomography in initial staging of patients with high-risk prostate cancer? Nuclear Medicine Communications.2020 Nov;41(11):1183-1188.
9. Dadhwal R, Kumar S, Dogra PN, et al. Endoscopic holmium laser fragmentation and retrieval of migrated intravesical prolene mesh. BMJ Case Report.2020 Dec;13(12):236987.
10. Agarwal V, Yadav SS, Kumar S, et al. Evaluating the role of extracellular vesicles as a biomarker under transmission electron microscope in prostate cancer and benign prostate hyperplasia patients. Urologia Journal.2021;May:1-6.
11. Sharma A, Kumar S, Pandey AK, et. Haralick texture features extracted from Ga-68 PSMA PET/CT to differentiate normal prostate from prostate cancer: a feasibility study. Nuclear Medicine Communications. 2021 Aug 26;42(12):1347-54.
12. Singh P, Kumar S, Panaiyadiyan S, et al. Repair of Rectourethral Fistula Using Gracilis Muscle Flap Interposition—a Tertiary Care Center Experience. Indian Journal of Surgery. 2021 Aug 15:1-6.
13. Pandey AK, Sharma A, Kumar S, et al. Design and evaluation of MeVislab networks for co-registration and cropping of positron emission tomography/computed tomography scans. Indian Journal of Nuclear Medicine. 2022 Jan 1;37(1):37.
14. Kumar S, Panaiyadiyan S, Singh P, et al.Safety, efficacy and functional outcomes of photoselective vaporisation of the prostate: A single-centre experience. Journal of Clinical Urology. 2022;March(Online)
15. Singh P, Kumar S, Panaiyadiyan S, et al. Robotic excision of vaginal pouch in ovotesticular disorder of sexual development. International Braz J Urol.2022;August (Online)

Kumar M, Singh SK, Arora S, Mittal V, Patidar N, Ansari M S, et al .Follow-up imaging after pediatric pyeloplasty. Indian J Urol, 2016;32:221-226

2.       S.Arora,M.S Ansari, P. Yadav, M. Kumar, S. Kumar Singh, V. Mittal, et al .Prediction of outcome of conservative management of antenatally detected hydronephrosis due to UPJ obstruction: A single-centre, prospective, multivariate analysis .Journal of Pediatric Urology 11(5) · DOI: 10.1016/j.jpurol.2015.02.008 March 2015

3.       Nitesh Patidar,  Manoj Kumar, Varun Mittal, M S Ansari, S. Kumar Sureka,Sohrab Arora  et. Transcutaneous posterior tibial nerve stimulation in pediatric overactive bladder: A Journal of pediatric urology preliminary report. · July 2015 DOI: 10.1016/j.jpurol.2015.04.040 

4.       Varun Mittal, Aneesh Srivastava, Nitesh Patidar, Manoj Kumar. Standardized Grading of Shock Wave Lithotripsy Complications with Modified Clavien System Urologia Internationalis. DOI: August 2016 10.1159/000446968

5.       Varun Mittal , Aneesh Srivastava, Hira Lal, Tarun Jvali, Nitesh Patidar, Manoj Kumar  et al.Management of venous hypertension following arteriovenous fistula creation for hemodialysis access . Indian J Urol 32(2) · DOI: 10.4103/0970-1591.174779 April 2016

6.       Arora Sohrab, Srivastava Aneesh, Sanjoy kumar Sureka, Mittal Varun, Patidar Nitesh, Kumar Manoj et al. Forgotten Reminders: an Experience with Managing 28 Forgotten Double-J Stents and Management of Related Complications.Indian Journal of Surgery77(Suppl 3) · January  2015DOI: 10.1007/s12262-015-1229-4

7.       Varun Mittal , Aneesh Srivastava, Hira Lal, Tarun Jvali, Nitesh Patidar, Manoj Kumar  et al.Vesicocutaneous Fistula After Sliding Hernia Repair.Urology Case Reports ·  September 2014DOI: 10.1016/j.eucr.2014.08.003

8.       Manoj Kumar, Ranjeet Kumar Singh, Rakesh Kapoor . Giant Vesical Calculus Formation as a Complication of Augmentation Cystoplasty. Images In Surgery, Indian Journal of Surgery,February 2016, Volume 78, Issue 1, pp 66-67,First online: 12 November 2015

9.       Aneesh Srivastava, Sanjoy Kumar Sureka, Saurabh Vashishtha, Shikhar Agarwal, Md Saleh Ansari, Manoj Kumar . Single-centre experience of retroperitoneoscopic approach in urology with tips to overcome the steep learning curve.J Minimal Access Surgery.2016 Apr-Jun; 12(2): 102–108.

10.   Aneesh Srivastava, Manoj Kumar, Jatinder Kumar, Sanjeet Kumar Singh, Sohrab Arora, Varun Mittal, Nitesh Patidar et al. under peer review in World Journal of Urology

11.   Kumar R, Kumar M. Evaluation of an infertile Male, Chapter 1, page 1-13, Male infertility in everyday practice. 1st edn, kontentworx publications, 2018, ISBN-978-93-83988-11-2

• Bhattacharjee S, Layek A, Maitra S, Sen S, Pal S, Gozi NK. Perioperative glycemic status of adult traumatic brain injury patients undergoing craniotomy: a prospective observational study. J Neurosurg Anesthesiol. 2014;26:313-9.
• Maitra S, Kirtania J, Pal S, Bhattacharjee S, Layek A, Ray S. Intraoperative blood glucose levels in nondiabetic patients undergoing elective major surgery under general anaesthesia receiving different crystalloid solutions for maintenance fluid. Anesth Essays Res 2013;7:183-8
• Baidya DK, Chandralekha, Darlong V, Pandey R, Goswami D, Maitra S. Comparative sonoanatomy of classic ‘‘short axis’’ probe position with a novel ‘‘medial-oblique’’ probe position for ultrasound-guided internal jugular vein cannulation: a crossover study. J Emerg Med. 2015;48:590-6.
• Datta PK, Pawar DK, Baidya DK, Maitra S, Aravindan A, Srinivas M, et al. 1% Dextrose containing intraoperative fluid in neonates maintains blood glucose level at the cost of gluconeogenesis – A randomized controlled trial. Paediatr Anaesth. 2016;26:599-607.
• Sethi S, Maitra S, Saini V, Samra T, Malhotra SK. Comparison of short-axis out-of-plane versus long-axis in-plane ultrasound-guided radial arterial cannulation in adult patients: a randomized controlled trial. J Anesth. 2017;31:89-94.
  • Baidya DK, Arora MK, Ray BR, Mohan VK, Anand RK, Khanna P, Maitra S. Comparison between classic short-axis out-of-plane approach and novel medial-oblique in-plane approach to ultrasound guided right internal jugular vein cannulation: A randomized controlled trial. Acta Anaesth. Belg., 2018;69:107-112
  • Maitra S, Ray BR, Bhattacharjee S, Baidya DK, Dhua D, Batra RK. Distal radial arterial cannulation in adult patients: A retrospective cohort study. Saudi J Anaesth. 2019 Jan-Mar;13(1):60-62. 
  • Anand RK, Maitra S, Ray BR, Baidhya DK, Khanna P, Chowdhury SR, Subramaniam R. Comparison of ultrasound-guided versus conventional palpatory method of dorsalis pedis artery cannulation: A randomized controlled trial. Saudi J Anaesth 2019;13:295-8.
  • Singh Y, Anand RK, Gupta S, Chowdhury SR, Maitra S, Baidya DK, et al. Role of IVC collapsibility index to predict post spinal hypotension in pregnant women undergoing caesarean section. An observational trial. Saudi J Anaesth 2019;13:312-7.
  • Maitra S, Baidya DK, Anand RK, Subramanium R, Bhattacharjee S. Carotid Artery Corrected Flow Time and Respiratory Variations of Peak Blood Flow Velocity for Prediction of Hypotension After Induction of General Anesthesia in Adult Patients Undergoing Elective Surgery: A Prospective Observational Study. J Ultrasound Med. 2020 Apr;39(4):721-730. 
  • Jobin SP, Maitra S, Baidya DK, Subramaniam R, Prasad G, Seenu V. Role of serial lactate measurement to predict 28-day mortality in patients undergoing emergency laparotomy for perforation peritonitis: prospective observational study. J Intensive Care. 2019;7:58.
  • Maitra S, Bhattacharjee S, Baidya DK. Correlation Between Doppler Derived Carotid Artery Corrected Flow Time and Pressure Transducer Derived Radial Artery Corrected Flow Time: A Prospective Observational Study. Cardiovasc Eng Technol. 2020 Apr;11(2):128-133. 
  • Kayina CA, Haritha D, Soni L, Behera S, Nair PR, Gouri M, Girish K, Deeparaj L, Maitra S, Anand RK, Ray BR, Baidya DK, Subramaniam R. Epidemiological & clinical characteristics & early outcome of COVID-19 patients in a tertiary care teaching hospital in India: A preliminary analysis. Indian J Med Res. 2020 Jul & Aug;152(1 & 2):100-104.
  • Chowhan G, Kundu R, Maitra S, Arora MK, Batra RK, Subramaniam R, Baidya DK, Trikha A. Efficacy of Left Ventricular Outflow Tract and Carotid Artery Velocity Time Integral as Predictors of Fluid Responsiveness in Patients with Sepsis and Septic Shock. Indian J Crit Care Med. 2021 Mar;25(3):310-316. 
  • Mini G, Ray BR, Anand RK, Muthiah T, Baidya DK, Rewari V, Sahni P, Maitra S. Effect of driving pressure-guided positive end-expiratory pressure (PEEP) titration on postoperative lung atelectasis in adult patients undergoing elective major abdominal surgery: A randomized controlled trial. Surgery. 2021 Mar 23:S0039-6060(21)00085-4. 
  • Behera S, Maitra S, Anand RK, Baidya DK, Subramaniam R, Kayina CA, Ray BR. Thoracic Radiological Characteristics of COVID-19 Patients at the Time of Presentation: A Cross-sectional Study. Indian J Crit Care Med. 2021 Jan;25(1):85-87. 
  • Nair PR, Maitra S, Ray BR, Anand RK, Baidya DK, Subramaniam R. Neutrophil-to-lymphocyte Ratio and Platelet-to-lymphocyte Ratio as Predictors of the Early Requirement of Mechanical Ventilation in COVID-19 Patients. Indian J Crit Care Med. 2020 Nov;24(11):1143-1144. 
  • Maitra S, Bhattacharjee S, Khanna P, Baidya DK. High frequency ventilation does not provide mortality benefit in comparison to conventional lung protective ventilation in acute respiratory distress patients: A meta-analysis of the randomized controlled trials. Anesthesiology. 2015;122:841-51.
  • Layek A, Maitra S, Pal S, Bhattacharjee S, Baidya DK. Efficacy of vasopressin during cardio-pulmonary resuscitation in adult patients: A meta-analysis. Resuscitation. 2014;85:855-863
  • Bhattacharjee S, Baidya DK, Maitra S. Therapeutic hypothermia after cardiac arrest is not associated with favorable neurological outcome: a meta-analysis. J Clin Anesth. 2016;33:225-32.
  • Maitra S, Som A, Bhattacharjee S, Arora MK, Baidya DK. Comparison of high-flow nasal oxygen therapy with conventional oxygen therapy and noninvasive ventilation in adult patients with acute hypoxemic respiratory failure: A meta-analysis and systematic review. J Crit Care. 2016;35:138-44.
  • Som A, Maitra S, Bhattacharjee S, Baidya DK. Goal directed fluid therapy decreases postoperative morbidity but not mortality in major non-cardiac surgery: a meta-analysis and trial sequential analysis of randomized controlled trials. J Anesth. 2017;31:66-81.
  • Bhattacharjee S, Soni KD, Maitra S, Baidya DK. Levosimendan does not provide mortality benefit over dobutamine in adult patients with septic shock: A meta-analysis of randomized controlled trials. J Clin Anesth. 2017;39:67-72.
  • Bhattacharjee S, Soni KD, Maitra S. Recruitment maneuver does not provide any  mortality benefit over lung protective strategy ventilation in adult patients with acute respiratory distress syndrome: a meta-analysis and systematic review of the randomized controlled trials. J Intensive Care. 2018 Jun 26;6:35.
  • Maitra S, Som A, Bhattacharjee S. Accuracy of quick Sequential Organ Failure Assessment (qSOFA) score and systemic inflammatory response syndrome (SIRS) criteria for predicting mortality in hospitalized patients with suspected infection: A meta-analysis of observational studies. Clin Microbiol Infect. 2018;24:1123-1129.
  • Bhattacharjee S, Maitra S, Baidya DK. Comparison between ultrasound guided technique and digital palpation technique for radial artery cannulation in adult patients: An updated meta-analysis of randomized controlled trials. J Clin Anesth. 2018;47:54-59.
  • Bhattacharjee S, Maitra S, Baidya DK. A comparison between video laryngoscopy and direct laryngoscopy for endotracheal intubation in the emergency department:  A meta-analysis of randomized controlled trials. J Clin Anesth. 2018;47:21-26.
  • Maitra S, Bhattacharjee S, Som A. Noninvasive Ventilation and Oxygen Therapy after Extubation in Patients with Acute Respiratory Failure: A Meta-analysis of Randomized Controlled Trials. Indian J Crit Care Med. 2019;23:414-422.
  • Maitra S, Bhattacharjee S, Baidya DK. Comparison of long-, short-, and oblique-axis approaches for ultrasound-guided internal jugular vein cannulation: A network meta-analysis. J Vasc Access. 2019 Aug 18:1129729819868927.
  • Tyagi A, Maitra S, Bhattacharjee S. Comparison of colloid and crystalloid using goal-directed fluid therapy protocol in non-cardiac surgery: a meta-analysis of randomized controlled trials. J Anesth. 2020 Dec;34(6):865-875. 
  • Kundu R, Baidya D, Anand R, Maitra S, Soni K, Subramanium R. Integrated ultrasound protocol in predicting weaning success and extubation failure: a prospective observational study. Anaesthesiol Intensive Ther. 2022 Jun 15:46841. 
  • Vaishnav M, Elhence A, Biswas S, Pathak P, Anand A, Sheikh S, Singh V, Maitra S, Goel A, Shalimar. The Outcome in Cirrhosis after Hospital Discharge is Not Worsened with COVID-19 Infection: A Propensity Score-matched Analysis. J Clin Exp Hepatol. 2022 May-Jun;12(3):830-840. 
  • Maitra S, Baidya DK, Ray BR, Chowhan G, Bhattacharjee S. Comparison of ultrasound guided dorsal radial artery cannulation and conventional radial artery cannulation at the volar aspect of wrist: A pilot randomized controlled trial. J Vasc Access. 2022 Apr 26:11297298221093953. 
  • Nair PR, Haritha D, Behera S, Kayina CA, Maitra S, Anand RK, Ray BR, Soneja M, Subramaniam R, Baidya DK. Comparison of High-Flow Nasal Cannula and Noninvasive Ventilation in Acute Hypoxemic Respiratory Failure Due to Severe COVID-19 Pneumonia. Respir Care. 2021 Dec;66(12):1824-1830. 
  • Chowdhury AR, Subramanian R, Maitra S, Bhattacharjee S, Lakshmy R, Baidya DK. Intraoperative lung protective ventilation in peritonitis patients undergoing emergency laparotomy: A randomised controlled trial. Indian J Anaesth. 2021 Nov;65(11):798-805. 
  • Rawat D, Roy A, Maitra S, Gulati A, Khanna P, Baidya DK. Vitamin C and COVID-19 treatment: A systematic review and meta-analysis of randomized controlled trials. Diabetes Metab Syndr. 2021 Nov-Dec;15(6):102324. 
  • Rawat D, Roy A, Maitra S, Shankar V, Khanna P, Baidya DK. "Vitamin D supplementation and COVID-19 treatment: A systematic review and meta-analysis". Diabetes Metab Syndr. 2021 Jul-Aug;15(4):102189. 
  • Sinha H, Maitra S, Anand RK, Aggarwal R, Rewari V, Subramaniam R, Trikha A, Arora MK, Batra RK, Saxena R, Baidya DK. Epidemiology and Prognostic Utility of Cellular Components of Hematological System in Sepsis. Indian J Crit Care Med. 2021 Jun;25(6):660-667.  

List of Publications

2025

Implants – Drug release via orthopaedic scaffolds – Fatigue Life

88. Sonu Singh, Jivesh Jain, Sunil Kumar Yadav, Prashant Kumar, Vijay Kumar Meena, Priya Vashisth, Dinesh Kalyanasundaram,* “Evaluation of Fatigue Life of Additively Manufactured Ti6Al4V Neovius Lattices in Simulated Body Fluid for Biomedical Applications”, Advanced Engineering Materials, Accepted, 2025. I. F – 3.4.

(https://doi.org/)

Biotech. Applications – Carbon Nanotubes for electrosorption

Rahul Patil, Dong Jiang, Xingtao Xu, Nitish Kumar, Sudip Bhattacharjee, Sunil Kumar Yadav, Dinesh Kalyanasundaram, Rahul R. Salunkhe, Asim Bhaumik, Nithima Khaorapapong, Yusuke Yamauchi, Saikat Dutta,* “Graphene-sponges containing multi-walled carbon nanotubes for electrosorption of salt-ions”, Chemical Engineering Journal, Vol. 506, 159270, 2025. I. F – 13.4.

(https://doi.org/10.1016/j.cej.2025.159270)

2024

Implants – Voice prosthesis/ Antimicrobial coatings

Manjeet Singh, Aiman Afreen, Mohd Anees, Dinesh Kalyanasundaram, Harpal Singh,* Naresh Bhatnagar, “Development of quaternary ammonium based acrylic copolymer antimicrobial coatings for polyurethane tracheoesophageal voice prostheses”, Journal of Materials Chemistry B, Vol. 12, pp. 10644-10655, 2024. I. F – 6.1.

(https://doi.org/10.1039/d4tb01071j)

MedTech Applications – Aerogel for Cartilage repair

Puneet Pareek, Shivani Chaudhary, Sonu Singh, Aishwarya Thattaru Thodikayil, Dinesh Kalyanasundaram, and Sachin Kumar,* “Bridging Biomimetic and Bioenergetics Scaffold: Cellulose-Graphene Oxide-Arginine Functionalized Aerogel for Stem Cell-Mediated Cartilage Repair”, International Journal of Biological Macromolecules, Vol. 278, Part 2, 134608, 2024. I. F – 7.7.

(https://doi.org/10.1016/j.ijbiomac.2024.134608)

Energy Applications – Laser textured surfaces

Albin Kuriakose, Pariksha Malik, Jitendra Nath Acharyya, Dinesh Kalyanasundaram, Pankaj Srivastava, and G Vijaya Prakash* “Nanosecond laser induced periodic silicon microstructures for broadband antireflective applications”, Optics and Laser Technology, Vol. 127, 111337, 2024. I. F – 5.0.

(https://doi.org/10.1016/j.optlastec.2024.111337)

Composites – Carbon-PEEK composite manufacturing

V. Balakumaran,* Ramasamy Alagirusamy, Dinesh Kalyanasundaram, “The synergistic effect and origin of strength in carbon fiber reinforced PAEK, PEEK, and PEKK high-performance thermoplastic composites manufactured by multi-scale aqueous dispersion coating”, Polymer Composites, Accepted, 2024.I. F. – 5.2.

(https://doi.org/10.1002/pc.28682)

Implants – Voice Prostheses

Manjeet Singh, Mohd Anees, Aiman Afreen, Dinesh Kalyanasundaram,Naresh Bhatnagar, Harpal Singh,* “Development of iodine based sustained release antimicrobial coatings for polyurethane voice prostheses”, Journal of Materials Chemistry B, Vol. 12, pp. 5907-5916, 2024.I. F. – 6.1.

(https://doi.org/10.1039/D4TB00439F)

Implants – Ti6Al4V

Amrit Raj Paul, Sonu Singh, Jaswant Hirwani, Suraj Yadav, Chaitali Dekiwadia, Manidipto Mukherjee, Dinesh Kalyanasundaram,* “Effect of Heat Treatment on Material property and Cell Viability of Wire Arc Additively Manufactured Ti6Al4V”, ACS Applied Bio Materials, Vol. 7, pp. 3096–3109, 2024.I. F. – 4.7.

(https://doi.org/10.1021/acsabm.4c00130)

Implants – Orthopedics (Meniscus)

Rajdeep Shankar Pawar, Sunil Kumar Yadav and Dinesh Kalyanasundaram,* “Evaluation of the stresses on the knee meniscus tissue under various loading conditions and correlation with resulting meniscal tears observed clinically: A Finite Element Study”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 46, 304, 2024I. F. – 2.2.

(https://doi.org/10.1007/s40430-024-04877-z)

Industrial Products – High Entropy Alloys

N. V. Abhijith, Sanyam Phutela, Deepak Kumar,*Dinesh Kalyanasundaram,* “Transitional and refractory elements-based high entropy alloy developed through mechanical alloying and microwave sintering: Tribological and corrosion responses", Vacuum, Vol.222, 113061, 2024.I. F. – 4.0.

(https://doi.org/10.1016/j.vacuum.2024.113061)

Diagnostics – Fungal Detection in patient samples

Rahul Roy, Gagandeep Singh, Ujjwal Ranjan Dahiya, Mragnayani Pandey, Immaculata Xess, and Dinesh Kalyanasundaram,* “Rapid detection of Mucorales in human blood and urine samples by functionalised Heusler magnetic nanoparticle assisted customized loop mediated isothermal amplification”, Medical Mycology, Vol. 62, 2024.I. F. – 2.9.

(https://doi.org/10.1093/mmy/myae007)

Implants – Drug release via orthopaedic scaffolds

Sonu Singh, Rahul Roy, Vijay Kumar Meena, Priya Vashisth, and Dinesh Kalyanasundaram,* “Nanotextured and drug loaded Neovius Ti6Al4V ELI scaffolds with osteogenesis with anti-cancer potential”, Materials & Design, Vol. 237, 112570, 2024.I. F. – 8.4.

(https://doi.org/10.1016/j.matdes.2023.112570)

Implants – New materials for Chondrogenesis

Misba Majood, OmNarayan Agarwal, Piyush Garg, Abhyavartin Selvam, Sunil Yadav, Sonu Singh, Dinesh Kalyanasundaram,Yogesh Verma, Ranu Nayak, Sujata Mohanty, and Monalisa Mukherjee,* “Carbon Quantum Dot-Nanocomposite Hydrogel as Denovo Nexus in Rapid Chondrogenesis”, Biomaterials Advances, Vol. 157, 213730, 2024.

(https://doi.org/10.1016/j.bioadv.2023.213730)

Implants – Surface modification

K. E. Ch. Vidyasagar, and Dinesh Kalyanasundaram,* “Enhanced corrosion resistance of CoCrMo by laser-based surface modification”, Surface Engineering, Accepted, 2024. I. F. – 2.451.

(https://doi.org/10.1177/02670844231214689)

2023

Implants – Drug release via orthopaedic scaffolds

Sonu Singh, Sunil Yadav, Vijay Kumar Meena, Priya Vashisth, and Dinesh Kalyanasundaram,* “Orthopedic Scaffolds: Evaluation of structural strength and permeability of fluid flow via an open cell Neovius structures for enhanced cellular growth”, ACS Biomaterials Science and Engineering, Vol. 9, pp. 5900-5911, 2023. I. F. – 5.395.

(https://doi.org/10.1021/acsbiomaterials.3c00436)

Nanoscale structures – Fabrication and evaluation

Vinod Parmar, Sonu Singh, Arvind Singh, Sunil Kumar, and Dinesh Kalyanasundaram,* “Hybrid thermo-physical modelling and experimentation of ultrafast laser-based fabrication of polycrystalline core-amorphous shell nitinol nanoparticles”, Optics and Laser Technology, Vol. 165, 109575, 2023.I. F. – 4.939.

(https://doi.org/10.1016/j.optlastec.2023.109575)

Implants – Amniotic membrane based biomaterial

Bhawna, Sunil Gujjar, KS Venkataprasanna, Shivam Tiwari, Jagadish Chandra Sharma, Priyanka Sharma, Mukta Pujani, Anil Kumar Pandey, Prasad Abnave,Dinesh Kalyanasundaram, Santosh Mathapati, “Stabilized human amniotic membrane for enhanced sustainability and biocompatibility”, Process Biochemistry, Vol. 129, pp. 67-75, 2023.I. F. – 4.885.

(https://doi.org/10.1016/j.procbio.2023.03.009)

Implants – Orthopedic (Polymeric screws)

Sunil Kumar Yadav,$ Arnab Sikidar,$ and Dinesh Kalyanasundaram,“Design of Polymeric Orthopedic Screws with Variable Stiffness and Multi-Objective Optimization of Injection Molding Process”, International journal of precision engineering and manufacturing, Vol. 24, pp. 629-643, 2023.I. F. – 2.041.

(https://doi.org/10.1007/s12541-023-00775-x)

Implants – Dental applications

Immaculata Jonna, Kalpana Bansal, Rahul Morankar, Vijay Prakash Mathur, Nitesh Tewari, and Shivam Pandey, “Effect of SDF/SSKI application on micro-tensile bond strength of composite resin to carious primary dentin - An in-vitro study”, Pediatric Dentistry, Vol. 45, pp. 147-152, 2023.I. F. – 2.378.

(https://pubmed.ncbi.nlm.nih.gov/37106537/)

Implants – Manufacturing by Electric discharge machining

Amit Mahajan, Sandeep Devgan, and Dinesh Kalyanasundaram,“Electrical Discharge Machining- A Futuristic Technique for Surface Engineering of Biomedical Alloys: A concise review”, Surface Topography: Metrology and Properties, Vol. 10, 043001, 2023.I. F. – 4.783.

(https://doi.org/10.1080/10426914.2022.2105873)

Composites – Carbon-PEEK composite manufacturing

V. Balakumaran,* Ramasamy Alagirusamy, Dinesh Kalyanasundaram,“A multi-scale aqueous dispersion coating technique for manufacturing carbon fiber reinforced PEEK composite”, Composites Part A: Applied Science and Manufacturing, Vol. 165, 107314, 2023.I. F. – 9.463.

(https://doi.org/10.1016/j.compositesa.2022.107314)

2022

Composites – Effect of radial alignment of fibers

Vijay Goud,* Ashraf Khan, Ramasamy Alagirusamy, Apurba Das and Dinesh Kalyanasundaram, “Mechanical properties of flax-polypropylene composites from dry flexible towpregs: Influence of radial position of flax fibers in the towpreg”, Journal of Natural Fibers, Vol. 19, pp. 15225-15237, 2022. I. F. – 3.507.

(https://doi.org/10.1080/15440478.2022.2120591)

Implants – New materials for Chondrogenesis

Misba Majood, Adeeba Shakeel, Sampathkumar Jeevanandham, Rohan Bhattacharya, Dakshi Kochhar, Aakanksha Agarwal, Aarti Singh, Dinesh Kalyanasundaram, Sujata Mohanty,* Monalisa Mukherjee,* “Hydrogel Nanosheets Confined 2D Rhombic Ice: A New Platform Enhancing Chondrogenesis”, Biomedical Materials, Vol. 17, 065004, 2022. I. F – 4.103.

(https://doi.org/10.1088/1748-605X/ac8e43)

Implants – Manufacturing by Electric discharge machining

Amit Mahajan,* Sandeep Devgan, and Dinesh Kalyanasundaram, “Surface alteration of Cobalt-Chromium and Duplex Stainless-Steel alloys for biomedical applications: A concise review”, Materials and Manufacturing Processes, Accepted, 2022. I. F. – 4.783.

(https://doi.org/10.1080/10426914.2022.2105873)

Biomechanics – Modeling and experimentation of Ankle-foot model

Arnab Sikidar and Dinesh Kalyanasundaram,* “An open-source OpenSim® ankle-foot musculoskeletal model for assessment of strains and forces in dense connective tissues”, Computer Methods and Programs in Biomedicine, Vol. 224, 106994, 2022. I. F. – 7.027.

(https://doi.org/10.1016/j.cmpb.2022.106994)

Biomechanics – Classification of AIS subjects via machine learning

Arnab Sikidar, K. E. C. Vidyasagar, Manish Gupta, Bhavuk Garg, and Dinesh Kalyanasundaram,* “Classification of mild and severe adolescent idiopathic scoliosis (AIS) from healthy subjects via a supervised learning model based on electromyogram and ground reaction force data during gait”, Biocybernetics and Biomedical engineering, Vol. 42, pp. 870-887, 2022. I. F. – 5.687.

(https://doi.org/10.1016/j.bbe.2022.06.006)

Diagnostics – Prescription pattern for Enteric fever

Soumyadip Chatterji, Priyanka Sharma, Avinash Kaur, Dinesh Kalyanasundaram, Ashutosh Biswas, Naveet Wig, Arti Kapil,* “A study on the clinical spectrum, prescription pattern and diagnosis of enteric fever in a tertiary care hospital of North India”, International Journal Of Community Medicine And Public Health, Vol. 9, pp. 2633-2638, 2022.

(https://dx.doi.org/10.18203/2394-6040.ijcmph20221546)

Implants – Animal Studies on ocular implant

Rohan Chawla, Jayanta Bhattacharyya, Laxmi Moksha, Anjali Phour, Thirumurthy Velpandian, Seema Kashyap, and Dinesh Kalyanasundaram,* “A novel, minimally invasive implant to assist in repeated intraocular drug delivery”, Biomedical Microdevices, Vol. 24, 17, 2022. I. F. – 3.783.

(https://doi.org/10.1007/s10544-022-00618-y)

Implants – Drug release via orthopaedic scaffolds

Sonu Singh, Priya Vashisth, Vijay Kumar Meena, and Dinesh Kalyanasundaram,* “Cellular studies and sustained drug delivery via nanostructures fabricated on 3D printed porous Neovius lattices of Ti6Al4V ELI”, Biomedical Materials, Vol. 17, 045004, 2022. I. F – 4.103.

(https://doi.org/10.1088/1748-605X/ac6922)

Nanoscale structures – Fabrication of core-shell metallic Nanoparticles

Ujjwal Ranjan Dahiya, Sonu Singh, Chetan Kumar Garg, Aakansha Rai, and Dinesh Kalyanasundaram,* “Modified surface composition and bio-compatibility of core-shell nitinol nanoparticles fabricated via laser ablation of differently passivized targets”, Frontiers in Materials, Vol. 9, 855705, 2022. I. F. – 3.983.

(https://doi.org/10.3389/fmats.2022.855705)

Diagnostics – Laser textured surfaces

Meenakshi Verma, Abhishek Rana, K. E. Ch. Vidyasagar, Dinesh Kalyanasundaram, Sampa Saha,* “Protein patterning on microtextured polymeric nano-brush templates obtained by nanosecond fibre laser”, Macromolecular Bioscience, 2100454, 2022. I. F – 5.859.

(https://doi.org/10.1002/mabi.202100454)

Industrial Products – Coating and Tribological studies

N. V. Abhijith, Deepak Kumar,* Dinesh Kalyanasundaram, "Development of single stage TiNbMoMnFe high entropy alloy coating on 304L stainless steel using HVOF thermal spray", Journal of thermal spray technology, Vol. 31, pp. 1032-1044, 2022. I. F. - 2.839.

(https://doi.org/10.1007/s11666-021-01294-9)

Industrial products – Surface modification and Tribology

Niharika Gupta,* Naresh Tandon, R. K. Pandey, K. E. Ch. Vidyasagar, Dinesh Kalyanasundaram, “Effects of micro-texture on the film formation and vibration behaviors of grease lubricated spur gearset”, Tribology International, Vol. 165, 107247, 2022. I. F. – 5.620.

(https://doi.org/10.1016/j.triboint.2021.107247)

2021

Implants – Design and Manufacturing of Elbow implant

Dilpreet Singh, Bhavuk Garg, Pulak Mohan Pandey and Dinesh Kalyanasundaram, “Design and development of 3D printing assisted microwave sintering of elbow implant with biomechanical properties similar to human elbow”, Rapid Prototyping Journal, Vol. 22, pp. 390-403, 2021. I. F – 4.043.

(https://doi.org/10.1108/RPJ-05-2021-0116)

Composites – Controlled alignment

Jayaram Pothnis, Dinesh Kalyanasundaram and Suhasini Gururaja, “Mitigation of notch sensitivity by controlled alignment of carbon nanotubes in epoxy using electric field application”, Composites Part A: Applied Science and Manufacturing, Vol. 149, 106544, 2021. I. F. – 9.463.

(https://doi.org/10.1016/j.compositesa.2021.106544)

Industrial products – Surface modification and Tribology

K. E. Ch. Vidyasagar, R. K. Pandey and Dinesh Kalyanasundaram, “An investigation of snake-skin like textures on the performance of radial ball bearings”, Journal of Bionic Engineering, Vol. 18, pp. 974-990, 2021. I. F. – 2.995.

(https://doi.org/10.1007/s42235-021-0056-5)

Diagnostics – COVID detection

Ujjwal Ranjan Dahiya, Guru Dutt Gupt, Rajendra Singh Dhaka, and Dinesh Kalyanasundaram, “Functionalized Co2FeAl Nanoparticles for Detection of SARS CoV‑2 based on Reverse Transcriptase Loop-Mediated Isothermal Amplification”, ACS Applied Nano Materials, Vol. 4, pp. 5871-5782, 2021. I. F. – 6.140.

(https://doi.org/10.1021/acsanm.1c00782)

Implants – Surface modification platform

K. E. Ch. Vidyasagar, Varun Aggarwal, Sasanka Sekhar Sinha, Subir Kumar Saha, and Dinesh Kalyanasundaram, “Laser based micro texturing of freeform surfaces of implants using a Stewart platform”, Precision Engineering, Vol. 72, pp. 294-303, 2021. I. F. – 3.315.

(https://doi.org/10.1016/j.precisioneng.2021.05.004)

Biomechanics - Modeling

Arnab Sikidar, M. Marieswaran and Dinesh Kalyanasundaram, “Estimation of forces on anterior cruciate ligament in dynamic activities”, Biomechanics and modeling in mechanobiology, Vol. 20, pp. 1533-1546, 2021. I. F – 3.623.

(https://doi.org/10.1007/s10237-021-01461-5)

Industrial products – Surface modification and Tribology

K. E. Ch. Vidyasagar, R. K. Pandey, Dinesh Kalyanasundaram, “Effects of microtextured inner raceways on the frictional and vibrational behaviour of grease lubricated radial ball bearings”, Friction, Vol. 9, pp. 1749-1765, 2021. I. F – 4.924.

(https://doi.org/10.1007/s40544-021-0495-3)

Composites - Manufacturing

V. Balakumaran, Ramasamy Alagirusamy, Dinesh Kalyanasundaram, “Epoxy based sandwich composite using three-dimensional integrally woven fabric as core strengthened with additional carbon face-sheets”, Journal of Mechanical Behavior of Biomedical Materials, Vol. 116, 104317, 2021. I. F. – 4.042.

(https://doi.org/10.1016/j.jmbbm.2021.104317)

Nanoscale structures – Fabrication and evaluation

Vinod Parmar, Sonu Singh, Sunil Kumar, G. Vijaya Prakash, Dinesh Kalyanasundaram, “Thermo-physical modeling and experimental validation of core-shell nanoparticle fabrication of nickel-titanium (nitinol) alloy”, Optics and Laser Technology, Vol. 138, 106880, 2021. I. F – 4.939.

(https://doi.org/10.1016/j.optlastec.2020.106880)

Biomechanics - Experimental

M. Marieswaran, Arnab Sikidar, Abhishek Rana, Dilpreet Singh, Nasim Mansoori, Sanjeev Lalwani, Dinesh Kalyanasundaram, “A cadaveric study on the strain rate dependent behavior of human anterior cruciate ligament”, Acta of Bioengineering and Biomechanics, Vol. 23, pp. 45-57, 2021. I. F – 1.238.

(https://doi.org/10.37190/ABB-01672-2020-05)

Composites – Manufacturing and evaluation

Jayaram Pothnis, Dinesh Kalyanasundaram, Suhasini Gururaja, “Enhancement of open hole tensile strength via alignment of carbon nanotubes infused in glass fiber – epoxy – CNT multi-scale composites”, Composites Part A: Applied Science and Manufacturing, Vol. 140, 106155, 2021. I. F. – 9.463.

(https://doi.org/10.1016/j.compositesa.2020.106155)

2020

Industrial products – Surface modification and Tribology

Niharika Gupta, Naresh Tandon, R. K. Pandey, K. E. Ch. Vidyasagar, Dinesh Kalyanasundaram, “Tribological and Vibration Studies of Textured Spur Gear Pairs Under Fully Flooded and Starved Lubricating Conditions”, Tribology Transactions, Published online, 2020. I. F. – 2.056.

(https://doi.org/10.1016/j.triboint.2021.107247)

Implants – Surface modification and Tribology

K. E. C. Vidyasagar, Abhishek Rana, and Dinesh Kalyanasundaram,* “Optimization of laser parameters for improved corrosion resistance of Nitinol”, Materials and Manufacturing processes, Vol. 35, pp. 1661-1669, 2020. I. F – 4.783.

(https://doi.org/10.1080/10426914.2020.1784926)

Composites – Manufacturing and evaluation

Jayaram Pothnis, Dinesh Kalyanasundaram* and Suhasini Gururaja,* “Controlled manipulation of CNTs in glass/epoxy composites with cut-outs using non-uniform electric field”, Advanced Composite Materials, Published Online, 2020. I. F – 2.920.

(https://doi.org/10.1080/09243046.2020.1744220)

Implants – Cytokine evaluation

Avinash Kaur, Om Prakash Kharbanda,* M. R. Rajeswari, and Dinesh Kalyanasundaram*, “Levels of TGF-β1 in peri-miniscrew implant crevicular fluid”, Journal of Oral Biology and Craniofacial Research, Vol. 10, pp. 93-98, 2020.

(https://doi.org/10.1186/s40510-017-0195-8)

Composites – Manufacturing and evaluation

Vijay Goud, Dilpreet Singh, Ramasamy Alagirusamy, Apurba Das and Dinesh Kalyanasundaram*, “Investigation of the mechanical performance of carbon/polypropylene 2D and 3D woven composites manufactured through multi-step impregnation processes”, Composites Part A: Applied Science and Manufacturing, Vol. 130, 105733, 2020. I. F. – 9.463.

(https://doi.org/10.1016/j.compositesa.2019.105733)

2019

Diagnostics – Salmonella Detection

Avinash Kaur, Priyanka Sharma, Ankur Ruhela, Harshit Khariwal, Sagar Seth, Adarsh Kumar, Ravikrishnan Elangovan, Arti Kapil, and Dinesh Kalyanasundaram,* “Simultaneous and high sensitive detection of Salmonella typhi and Salmonella paratyphi A in human clinical blood samples using an affordable and portable device”, Biomedical Microdevices, Vol. 21, 95, 2019. I. F. – 3.783.

(https://doi.org/10.1007/s10544-019-0441-6)

Composites – Manufacturing and evaluation

Vijay Goud, Ramasamy Alagirusamy, Apurba Das and Dinesh Kalyanasundaram*, “Box-Behnken technique based multi-parametric optimization of electrostatic spray coating in the manufacturing of thermoplastic composites”, Materials and Manufacturing Processes, Vol. 34, pp. 1638-1645, 2019. I. F – 4.783.

(https://doi.org/10.1080/10426914.2019.1666991)

Nanoscale structures – Fabrication and evaluation

Adeeba Shakeel, Rohan Bhattacharya, Sampathkumar Jeevanandham, Dakshi Kochhar, Aarti Singh, Lalita Mehra, Maryam Ghufran, Piyush Garg, Sujata Sangam, Subhrajit Biswas, Amit Tyagi, Dinesh Kalyanasundaram, Sandip Chakrabarti, and Monalisa Mukherjee,* “Graphene Quantum Dots in the Game of Directing Polymer Self-assembly to Exotic Kagomé Lattice and Janus Nanostructures”, ACS Nano, Vol. 13, pp. 9397-9407, 2019. I. F – 18.027.

(https://doi.org/10.1021/acsnano.9b04188)

Implants – Machining and modeling

Vinod Parmar, Avinash Kumar, G. Vijaya Prakash, Subhra Datta, and Dinesh Kalyanasundaram,* “Investigation, modelling and validation of material separation mechanism during fiber laser machining of medical grade titanium alloy Ti6Al4V and stainless steel SS316L”, Mechanics of Materials, Vol. 137, 103125, 2019. I. F – 4.137.

(https://doi.org/10.1016/j.mechmat.2019.103125)

Biomechanics - Modeling

Arnab Sikidar and Dinesh Kalyanasundaram,* “An open-source plugin for OpenSim® to model the non-linear behaviour of dense connective tissues of the human knee at variable strain rates”, Computers in Biology and Medicine, Vol. 110, pp. 186-195, 2019. I. F – 6.698.

(https://doi.org/10.1016/j.compbiomed.2019.05.021)

Nanoscale structures – Fabrication and evaluation

Vinod Parmar, Kandarp Changela, B. Srinivas, Manimuthu Mani Sankar, Sujata Mohanty, S. K. Panigraphi, K. Hariharan and Dinesh Kalyanasundaram,* “Relationship between Dislocation Density and Antibacterial Activity of Cryo-Rolled and Cold-Rolled Copper”, Materials, Vol. 12, pp. 1-11, 2019. I. F – 3.748.

(https://doi.org/10.3390/ma12020200)

Nanoscale structures – Fabrication and evaluation

Arvind Singh, Pranab K Mohapatra, Dinesh Kalyanasundaram, Sunil Kumar,* “Self functionalized ultrastable water suspension of luminescent carbon quantum dots”, Materials Chemistry and Physics, Vol. 225, pp. 23-27, 2019. I. F – 4.778.

(https://doi.org/10.1016/j.matchemphys.2018.12.031)

Composites – Manufacturing and evaluation

Vijay Goud, Ramasamy Alagirusamy, Apurba Das and Dinesh Kalyanasundaram*, “Influence of various forms of polypropylene matrix (fiber, powder and film states) on the flexural strength of carbon-polypropylene composites”, Composites Part B: Engineering, Vol. 166, pp. 56-64, 2019. I. F. – 11.322.

(https://doi.org/10.1016/j.compositesb.2018.11.135)

Implants – Clinical evaluation of Surgical Guides

Bhavuk Garg,* Manish Gupta, Menaka Singh and Dinesh Kalyanasundaram, “Outcome and safety analysis of 3D printed patient specific pedicle screw jigs for complex spinal deformities: A comparative study”, The Spine Journal, Vol. 19, pp. 56-64, 2019. I. F – 4.297.

(https://doi.org/10.1016/j.spinee.2018.05.001)

Composites – Manufacturing and evaluation

Jayaram Pothnis, Suhasini Gururaja,* and Dinesh Kalyanasundaram, “Development and characterization of electric field directed preferentially aligned CNT nanocomposites”, Mechanics of Advanced Materials and Structures, Vol. 26, pp. 35-41, 2019. I. F – 3.338.

(https://doi.org/10.1080/15376494.2018.1534165)

Biomechanics - Experimental

Dilpreet Singh, Abhishek Rana, Saroj Kaler Jhajhria, Bhavuk Garg, Pulak Mohan Pandey, and Dinesh Kalyanasundaram,* “Experimental assessment of biomechanical properties in human male elbow bone subjected to bending and compression loads”, Journal of Applied Biomaterials & Functional Materials, Vol. 2, pp. 1-13, 2019. I. F – 2.744.

(http://journals.sagepub.com/doi/full/10.1177/2280800018793816)

2018

Implants - Manufacturing

Dilpreet Singh, Pulak M Pandey, and Dinesh Kalyanasundaram,* “Optimization of pressureless microwave sintering of Ti6Al4V by response surface methodology”, Materials and Manufacturing processes, Vol. 33, pp. 1835-44, 2018. I. F – 4.783.

(https://doi.org/10.1080/10426914.2018.1476765)

Composites – Fatigue testing

Dinesh Kalyanasundaram,* Suhasini Gururaja, Prajakta Prabhune, and Dilpreet Singh “Open hole fatigue testing of laser machined MD-CFRPs”, Composites Part A: Applied Science and Manufacturing, Vol. 111, pp. 33-41, 2018. I. F – 9.463.

(https://doi.org/10.1016/j.compositesa.2018.05.005)

Diagnostics – Salmonella Detection

Avinash Kaur, Arti Kapil, Ravikrishnan Elangovan, Sandeep Jha and Dinesh Kalyanasundaram,* “Highly-sensitive detection of Salmonella typhi in clinical blood samples by magnetic nanoparticle based enrichment and in-situ measurement of isothermal amplification of nucleic acids”, PLoS One, Vol. 13, Article no. e0194817, pp. 1-14, 2018. I. F. – 3.752.

(https://doi.org/10.1371/journal.pone.0194817)

Biomechanics - Modeling

M. Marieswaran, Arnab Sikidar, Anu Goel, Deepak Joshi and Dinesh Kalyanasundaram,* “An extended OpenSim knee model for analysis of strains of connective tissues”, Biomedical Engineering Online, Vol. 17, Article no. 17:42, pp. 1-13, 2018. I. F. – 3.903.

(https://doi.org/10.1186/s12938-018-0474-8)

Implants – Surface modification

Vinod Parmar, Avinash Kumar, Manimuthu Mani Sankar, Subhra Datta, G. Vijaya Prakash, Sujata Mohanty* and Dinesh Kalyanasundaram,* “Oxidation facilitated antimicrobial ability of laser micro-textured titanium alloy against gram-positive staphylococcus aureus for biomedical applications”, Journal of Laser Applications, Vol. 30, Article no. 032001, pp. 1-10, 2018. I. F – 2.521.

(https://doi.org/10.2351/1.5039860)

Biomechanics - Modeling

Ashutosh Bijalwan, Badri Prasad Patel,* M. Marieswaran and Dinesh Kalyanasundaram, “Volumetric locking free 3D finite element for modelling of anisotropic visco-hyperelastic behaviour of Anterior Cruciate Ligament”, Journal of Biomechanics, Vol. 73, pp. 1-8, 2018. I. F. – 2.789.

(https://doi.org/10.1016/j.jbiomech.2018.03.016)

Prosthesis – Design and development

Srinivas Pandit, Anoop Kant Godiyal, Amit Kumar Vimal, Upinderpal Singh, Deepak Joshi,* and Dinesh Kalyanasundaram, “An affordable insole-sensor based trans-femoral prosthesis for normal gait”, Sensors, Vol. 18, pp. 706, 2018. I. F. – 3.847.

(https://doi.org/10.3390/s18030706)

Diagnostics – Salmonella Detection

Avinash Kaur, Ritu Das, Mayank Rai Nigam, Ravikrishnan Elangovan, Deepal Pandya, Sandeep Jha* and Dinesh Kalyanasundaram,* “Rapid detection device for Salmonella typhi in milk, fruit juice, tap water and calf serum”, Indian Journal of Microbiology, Vol. 58, pp. 381-392, 2018. I. F. – 2.461.

(https://doi.org/10.1007/s12088-018-0730-4)

Composites – Manufacturing and evaluation

Vijay Goud, Ramasamy Alagirusamy, Apurba Das* and Dinesh Kalyanasundaram, “Dry Electrostatic Spray Coated Towpregs for Thermoplastic Composites”, Fibers and Polymers, Vol. 19, pp. 364-374, 2018. I. F. – 2.347.

(https://doi.org/10.1007/s12221-018-7470-7)

Biomechanics - Experimental

M. Marieswaran, Ishita Jain, Bhavuk Garg, Vijay Sharma and Dinesh Kalyanasundaram,* “A review on biomechanics of anterior cruciate ligament and materials for reconstruction”, Applied Bionics and Biomechanics, Vol. 2018, pp. 1-14, 2018. I. F. – 1.664.

(https://doi.org/10.1155/2018/4657824)

Implants – Surface modification and modeling

Avinash Kumar, Subhra Datta,* and Dinesh Kalyanasundaram, “Liquid slippage in confined flows: Effect of periodic micropatterns of arbitrary pitch and amplitude”, ASME Journal of Heat Transfer, Vol. 140, Article no. 012403, pp. 1-7, 2018. I. F. – 1.855.

(https://doi.org/10.1115/1.4037363)

Implants - Manufacturing

Dilpreet Singh, Abhishek Rana, Pawan Sharma, Pulak Mohan Pandey, Dinesh Kalyanasundaram,* “Microwave sintering of Ti6Al4V: Optimization of processing parameters for maximal tensile strength and minimal pore size”, Metals, Vol. 8, pp. 1-15, 2018. I. F – 2.695.

(https://doi.org/10.3390/met8121086)

Biomechanics - Experimental

M. Marieswaran, Nasim Mansoori, Vijay Kumar Digge, Saroj Kaler Jhajhria, Chittaranjan Behera, Sanjeev Lalwani, and Dinesh Kalyanasundaram,* “Effect of preservation methods on tensile properties of human femur-ACL-tibial complex (FATC) – A cadaveric study on male subjects”, Acta of Bioengineering and Biomechanics, Vol. 20, pp. 31-42, 2018. I. F. – 1.238.

(https://doi.org/10.5277/ABB-01134-2018-03)

2017 and earlier

Implants – Cytokine Secretion

Avinash Kaur, Om Prakash Kharbanda, Priyanka Kapoor, and Dinesh Kalyanasundaram, “A review of biomarkers in peri-miniscrew implant crevicular fluid (PMICF)”, Progress in Orthodontics, Vol. 18, Article no. 18:42, pp. 1-8, 2017. I. F. – 3.247.

https://doi.org/10.1186/s40510-017-0195-8

Composites – Manufacturing and Evaluation

Hemant Chouhan, Dilpreet Singh, Vinod Parmar, Dinesh Kalyanasundaram, Naresh Bhatnagar, “Laser machining of Kevlar fiber reinforced laminates–Effect of polyetherimide versus polypropylene matrix”, Composites Science and Technology, Vol. 134, pp. 267-274, 2016. I. F – 9.987.

https://doi.org/10.1016/j.compscitech.2016.08.026

Implants – Surface Modification and Modeling

Avinash Kumar, Subhra Datta, and Dinesh Kalyanasundaram, “Permeability and effective slip in confined flows transverse to wall slippage patterns”, Physics of Fluids, Vol. 28, Article no. 082002, pp. 1-19, 2016. I. F – 4.980.

https://doi.org/10.1063/1.4959184

Composites – Manufacturing and Evaluation

Akshay Hejjaji, Dilpreet Singh, Sagar Kubher, Dinesh Kalyanasundaram, and Suhasini Gururaja, “Machining damage in FRPs: Laser versus conventional drilling”, Composites Part A: Applied Science and Manufacturing, Vol. 82, pp. 42-52, 2016. I. F – 9.463.

https://doi.org/10.1016/j.compositesa.2015.11.036

Implants – Surface Modification and Evaluation

Pradnya Patil, Om Prakash Kharbanda, Ritu Duggal, Taposh K Das, Dinesh Kalyanasundaram, “Surface deterioration and elemental composition of retrieved orthodontic miniscrews”, American Journal of Orthodontics and Dentofacial Orthopedics, Vol. 147 (4), pp. S88-S100, 2015. I. F – 2.711.

https://doi.org/10.1016/j.ajodo.2014.10.034

Industrial Products - Laser Machining and Modeling

Dinesh Kalyanasundaram, Andrea Schmidt, Pranav Shrotriya, and Pal Molian, “Hybrid CO2 Laser/Waterjet Machining of Polycrystalline Diamond Substrate: Material Separation Through Transformation Induced Controlled Fracture”, ASME Journal of Manufacturing Science and Engineering, Vol. 136, Article no. 041001, pp. 1-10, 2014. I. F – 3.033.

https://doi.org/10.1115/1.4027304

Diagnostics – DNA Preparation using Electrophoresis

Dinesh Kalyanasundaram, Jong-Hoon Kim, Gareth Fotouhi, Hyun-Boo Lee, Morgan Hiraiwa, Kieseok Oh, Kyong-Hoon Lee, Jae-Hyun Chung, “Nanotips for single-step preparation of DNA for qPCR analysis”, Analyst, Vol. 138, pp. 3135-3138, 2013. I. F – 5.227.

https://doi.org/10.1039/C3AN00170A

Diagnostics – DNA Preparation using Electrophoresis

Dinesh Kalyanasundaram, Jong-Hoon Kim, Woon-Hong Yeo, Kieseok Oh, Kyong-Hoon Lee, M-H Kim, S-M Ryew, S-G Ahn, Dayong Gao, Gerard A Cangelosi, Jae-Hyun Chung, “Rapid extraction and preservation of genomic DNA from human samples”, Analytical and Bioanalytical Chemistry, Vol. 405 (6), pp. 1977-1983, 2012. I. F – 4.478.

https://doi.org/10.1007/s00216-012-6637-8

Diagnostics – DNA Preparation using Electrophoresis

Dinesh Kalyanasundaram, Shinnosuke Inoue, Jong-Hoon Kim, Hyun-Boo Lee, Zenko Kawabata, Woon-Hong Yeo, Gerard A Cangelosi, Kieseok Oh, Dayong Gao, Kyong-Hoon Lee, Jae-Hyun Chung, “Electric-field induced concentration and capture of DNA onto microtips”, Microfluidics and Nanofluidics, Vol. 13 (2), pp. 217-225, 2012. I. F – 3.090.

https://doi.org/10.1007/s10404-012-0956-0

Diagnostics – Tuberculosis

Joon-hong Kim, Woon-Hong Yeo, Zhiquan Shu, Shinnouske Innuoe, Dinesh Kalyanasundaram, John Ludwig, Clement E Furlong, James J Riley, Kris M Weigel, Gerard A Cangelosi, Kieseok Oh, Kyong-Hoon Lee, Dayong Gao, Jae-Hyun Chung, “Immunosensor towards low-cost, rapid diagnosis of tuberculosis”, Lab on a Chip, Vol. 12 (8), pp. 1437-1440, 2012. I. F – 7.517.

https://doi.org/10.1039/C2LC21131A

Industrial Products - Laser Machining and Modeling

Dinesh Kalyanasundaram, Pal Molian and Pranav Shrotriya, “Application of chemical transformation induced fracture for cutting of superhard materials”, Journal of Manufacturing Processes, Vol. 14(3), pp. 336-342, 2012. I. F – 5.684.

https://doi.org/10.1016/j.jmapro.2011.11.004

Industrial Products - Laser Machining and Modeling

Dinesh Kalyanasundaram,* Pranav Shrotriya, and Pal Molian, “Fracture mechanics based hybrid laser/waterjet machining of Zirconia (Y-PSZ)”, International Journal of Machine Tools & Manufacture, Vol. 50, pp. 97-105, 2010. I. F – 10.331.

https://doi.org/10.1016/j.ijmachtools.2009.09.002

Industrial Products - Laser Machining and Modeling

Dinesh Kalyanasundaram,* Pranav Shrotriya, and Pal Molian, “Obtaining a Relationship Between Process Parameters and Fracture Characteristics for Hybrid CO2 Laser∕Waterjet Machining of Ceramics”, ASME Journal of Engineering Materials and Technology, Vol. 131, Article no. 011005, pp. 1-10, 2008. I. F – 1.626.

https://doi.org/10.1115/1.3026547

Industrial Products - Laser Machining and Modeling

Dinesh Kalyanasundaram,* Gamal Shehata, Clayton Neumann, Pranav Shrotriya, and Pal Molian, “Design and validation of a hybrid laser/water-jet machining system for brittle materials”, Journal of Laser Applications, Vol. 20, pp. 127-134, 2008. I.F – 1.636.

Industrial Products – Coating using Electrophoresis

Dinesh Kalyanasundaram* and Pal Molian, “Electrodeposition of nanodiamond particles on aluminium alloy A319 for improved tribological properties”, Micro & Nano letters, Vol. 3, pp. 110-116, 2008. I.F – 0.980.

Conference Proceedings:

• Rohan Chawla, Dinesh Kalyanasundaram, Laxmi Moksha, Jayanta Bhattacharyya, Anjali Phour, Thirumurthy Velpandian, Seema Kashyap, “A novel, minimally invasive implant for intraocular drug delivery”, Investigative ophthalmology and visual science, Denver, USA, 2022.
• Pragya Tyagi, Kapil Sikka, Amit Chirom Singh, and Dinesh Kalyanasundaram, “Effect of Earmuff on Distortion Product Otoacoustic emissions in the presence of Noise”, “Indian Speech & Hearing Association Conference, New Delhi, India, 2022.
• V. Balakumaran, Kapil Sikka, Amit Chirom Singh, Nils Heitmann, Thomas Rosner, Samarjit Chakraborty and Dinesh Kalyanasundaram, “Three-dimensional study of Steady State Sound Pressure of Ear Canal using Finite Elemental Analysis”, 8th World Congress of Biomechanics, Dublin, Ireland, 2018.
• Arnab Sikidar, Deepak Joshi and Dinesh Kalyanasundaram, “An updated OpenSim Knee Model for strain analysis of connective tissues”, 8th World Congress of Biomechanics, Dublin, Ireland, 2018.
• Jayaram Pothnis, Dinesh Kalyanasundaram, and Suhasini Gururaja, “Machining damage in FRPs”, 18th European Conference on Composite Materials, Athens, Greece, 2018.
• Avinash Kaur, Arti Kapil, Ravikrishnan Elangovan, Sandeep Jha and Dinesh Kalyanasundaram, “Rapid detection of pathogen in point-of-care setup”, 28th Anniversary World Congress on Biosensors, Miami, FL, USA, 2018.
• Avinash Kumar, Subhra Datta, Dinesh Kalyanasundaram, “Reduction of hydraulic friction in confined flows by laser texturing: Experiments and theoretical validation”, ASME 2018 16th International Conference on Nanochannels, Microchannels and Minichannels, Dubrovnik, Croatia, 2018.
• Avinash Kaur, Om Prakash Kharbanda, M. R. Rajeswari, and Dinesh Kalyanasundaram, “Study of HMGB1, TGF-β1 levels and pH Value In PMICF”, 96th General Session and Exhibition of the International Association for Dental Research, London, UK, 2018.
• Avinash Kumar, Subhra Datta, Dinesh Kalyanasundaram, “Confinement effects on effective slip of patterned surfaces", Fluids Engineering Division Summer Meeting, Hawaii, USA, 2017.
• Avinash Kaur, Arti Kapil, Ravikrishnan Elangovan, Sandeep Jha and Dinesh Kalyanasundaram, “Highly-sensitive detection of Salmonella typhi in human blood using a portable optical system for detection of nucleic acids amplification”, Healthcare Innovations and Point of Care Technologies, Bethasda, MD, USA, 2017.
• Vinod Parmar, G Vijaya Prakash, Dinesh Kalyanasundaram, “Fabrication of Anti-reflective Microstructured Silicon Surfaces Using Nanosecond Fiber Laser Texturing”, Optical Nanostructures and Advanced Materials for Photovoltaics, Boulder, CO, USA, 2017.
• Avinash Kumar, Subhra Datta, Dinesh Kalyanasundaram, “Liquid Slippage in Confined Flows: Effect of Periodic Micropatterns of Arbitrary Pitch and Amplitude”, ASME 2016 5th International Conference on Micro/Nanoscale Heat and Mass Transfer, Biopolis, Singapore, 2016.
• Joon-hong Kim, Woon-Hong Yeo, Zhiquan Shu, Scott Soelberg, Shinnouske Innuoe, Dinesh Kalyanasundaram et al, “Highly sensitive and specific microtip-immunofluorescence sensor for rapid TB diagnosis”, μTAS 2011.
• Dinesh Kalyanasundaram, Pranav Shrotriya and Pal Molian, “Application of Chemical Transformation induced Fracture for Cutting of Superhard Materials”, North American Manufacturing Research Institute Conference, Society of Manufacturing Engineers, Volume 39, May 2011.
• Rodger Blum, Dinesh Kalyanasundaram, Rajeev Nair, and Pal Molian, “Nano-diamond coating of aluminum by laser-sintering techniques” Proceedings of the 2008 Nanotechnology Conference and Trade Show, Volume 1, pg: 470-474, CRC Press, June 2008.
• Dinesh Kalyanasundaram, Pranav Shrotriya, and Pal Molian, “CO2 Laser/Waterjet machining of Polycrystalline Cubic Boron Nitride” – North American Manufacturing Research Institute Conference, Society of Manufacturing Engineers, Volume 36, pg: 517-524, May 2008. Featured in July 2008 issue of Manufacturing Magazine.

PATENTS

• Chanda, A., Flynn, Z., and Unnikrishnan, V., "Biofidelic Skin Simulant", 2018, US Patent No. 10,049,601 B2
• Chanda, A., et al., "Biofidelic Conductive Skin Simulant", 2017, US Patent App. No. 16/106,934
• Chanda, A., and Unnikrishnan, V., "Customized Insoles for Diabetic and Pressure Ulcers", 2016, US Patent App. No. 15/646,046
• Chanda, A., and Robbins, T., "3D Printed Custom Orthotic Insole Assembly", 2017, US Patent App. No. 62/472,408
• Chanda, A., Flynn, Z., and Unnikrishnan, V., "Vaginal Tissue Surrogate", 2016, US Patent App. No. 62/263,942
• Chanda, A., Griffin, D.J., and Egnoto, M.J., "Smart Olfactory Warning Localized Systems (OWLS)", 2016, US Patent App. No. 62/389,223
• Chanda, A., et al., "Biofidelic Coronary Artery Surrogates", 2015, US Patent App. No. 62/326,643

JOURNAL PUBLICATIONS

• Chanda, A., T. Ruchti, and V. Unnikrishnan, Computational modeling of wound suture: a review. IEEE Reviews in Biomedical Engineering, 2018.
• Chanda, A. and C. Callaway, Tissue Anisotropy Modeling Using Soft Composite Materials. Applied bionics and biomechanics, 2018. ID 4838157.
• Chanda, A., Biomechanical modeling of human skin tissue surrogates. Biomimetics, 2018. 3(3): p. 18.
• Chanda, A. and V. Unnikrishnan, Novel insole design for diabetic foot ulcer management. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 2018. (Accepted Manuscript)
• Chanda, A. and K. Curry, Patient-Specific Biofidelic Human Coronary Artery Surrogates. Journal of Mechanics in Medicine and Biology, 2018. 18.
• Chanda, A. and C. Callaway, Computational modeling of blast induced whole-body injury: a review. Journal of medical engineering & technology, 2018: p. 1-17.
• Chanda, A., T. Jones, and K. Beschorner, Generalizability of Footwear Traction Performance across Flooring and Contaminant Conditions. IISE Transactions on Occupational Ergonomics and Human Factors, 2018. 6.
• Chanda, A., Z. Flynn, and V. Unnikrishnan, Biomechanical characterization of normal and prolapsed vaginal tissue surrogates. Journal of Mechanics in Medicine and Biology, 2018. 18(03): p. 1750100.
• Chanda, A. and W. Upchurch, Modeling of Stress and Strain Effects in Wounded Skin. Journal of Applied Physics, 2018. (Accepted Manuscript).
• Chanda, A., T. Ruchti, and W. Upchurch, Biomechanical Modeling of Prosthetic Mesh and Human Tissue Surrogate Interaction. Biomimetics, 2018. 3(3): p. 27.
• Chanda, A. and S. McClain, Mechanical Modeling of Healthy and Diseased Calcaneal Fat Pad Surrogates. Biomimetics, 2018. 
• Chanda, A., V. Unnikrishnan, and K. Lackey, Biofidelic Conductive Soft Tissue Surrogates. International Journal of Polymeric Materials and Polymeric Biomaterials, 2018. (In Minor Revision)
• Chanda, A., et al., Vaginal changes due to varying degrees of rectocele prolapse: A computational study. Journal of Biomechanical Engineering, 2017. 139(10): p. 101001.
• Chanda, A. and V. Unnikrishnan, Effect of bladder and rectal loads on the vaginal canal and levator ani in varying pelvic floor conditions. Mechanics of Advanced Materials and Structures, 2017.
• Chanda, A., et al., Experimental study on tissue phantoms to understand the effect of injury and suturing on human skin mechanical properties. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 2017. 231(1): p. 80-91.
• Chanda, A. and V. Unnikrishnan, A realistic 3D computational model of the closure of skin wound with interrupted sutures. Journal of Mechanics in Medicine and Biology, 2017. 17(01): p. 1750025.
• Chanda, A., et al., A biofidelic computational model of the female pelvic system to understand effect of bladder fill and progressive vaginal tissue stiffening due to prolapse on anterior vaginal wall. International journal for numerical methods in biomedical engineering, 2016. 32(11): p. e02767.
• Chanda, A., et al., Biofidelic human brain tissue surrogates. Mechanics of Advanced Materials and Structures, 2016.
• Chanda, A., R. Graeter, and V. Unnikrishnan, Effect of blasts on subject-specific computational models of skin and bone sections at various locations on the human body. AIMS Mater. Sci, 2015. 2(4): p. 425-447.
• Chanda, A. and H. Ghoneim, Pumping potential of a two-layer left-ventricle-like flexible-matrix-composite structure. Composite Structures, 2015. 122: p. 570-575.
• Chanda, A., et al., Computational modeling of the female pelvic support structures and organs to understand the mechanism of pelvic organ prolapse: a review. ASME Applied Mechanics Reviews, 2015. 67(4): p. 040801.
• Chanda, Arnab, Aiden Reuter, and Kurt E. Beschorner. "Vinyl Composite Tile (VCT) Surrogate for Mechanical Slip Testing." IISE Transactions on Occupational Ergonomics and Human Factors just-accepted (2019): 1-12.

CONFERENCE PAPERS

• A. Chanda, and V. Unnikrishnan, "Anisotropic Soft Composite Based Hyperelastic Model" Proceedings of the American Society for Composites (ASC): Thirty-Third Technical Conference, Seattle USA, 2018.
• Chanda, A. and W. Upchurch, Review of Recent Advances in Vaginal Mesh Tissue Interaction, Research & Development in Material Science, New York USA, 2018.
• A. Chanda, K. Lackey, and V. Unnikrishnan, "Biofidelic Conductive Synthetic Skin Composites" Proceedings of the American Society for Composites (ASC): Thirty-Second Technical Conference, West Lafayette USA, 2017.
• A. Chanda, and V. Unnikrishnan, "Human Tissue Simulants for Study of Traumatic Brain Injury (TBI)." Proceedings of the American Society for Composites: Thirty-First Technical Conference, Williamsburg USA, 2016
• A. Chanda, et al. "Computational Modeling of Anterior and Posterior Pelvic Organ Prolapse (POP)." ASME 2016 International Mechanical Engineering Congress and Exposition (IMECE), Phoenix USA, 2016.
• A. Chanda, Z. Flynn, and V. Unnikrishnan, "Customizable Human Skin Simulants." American Institute of Aeronautics and Astronautics (AIAA), NASA, Huntsville USA, 2015.
• Ghoneim, H. and A. Chanda. Pumping potential of a left-ventricle-like flexiblematrix-composite structure. in eProceedings of the 19th international conference on composite materials (ICCM19), Montreal Canada, 2013.

INVITED TALKS AND CONFERENCE PRESENTATIONS

• A. Chanda, and V. Unnikrishnan, "Biofidelic Anisotropic Soft Tissue Modeling" International Conference on Mechanics of Advanced Materials and Structures (ICMAMS), Politecnico di Torino University, Torino, Italy, 2018.
• A. Chanda, and V. Unnikrishnan, "Multi-fiber Anisotropic Characterization of Soft Bio-Composite Systems" International Conference on Composite Materials and Structures (ICCMS), Indian Institute of Technology (IIT) Hyderabad, India, 2017.
• A. Chanda, K. Lackey, and V. Unnikrishnan, "Biofidelic Conductive Synthetic Skin Composites" Proceedings of the American Society for Composites (ASC): Thirty-Second Technical Conference, Purdue University, West Lafayette, USA, 2017.
• A. Chanda, and V.U. Unnikrishnan, "Mechanics of interaction of the pelvic organs and muscles in pelvic organ prolapse (POP)" Society of Engineering Science 53rd Annual Technical Meeting, University of Maryland, College Park, USA, 2016.
• A. Chanda, and V.U. Unnikrishnan, "Interrupted Suture Force Estimation for Skin Wound Closure: A Computational Approach" Society of Engineering Science 52nd Annual Technical Meeting, Texas A&M University, College Station, USA, 2015.
• A. Chanda, and V.U. Unnikrishnan, "Subject-Specific Computational Study of Blast Induced Traumatic Injuries" Society of Engineering Science 52nd Annual Technical Meeting, Texas A&M University, College Station, USA, 2015.
• A. Chanda, and V.U. Unnikrishnan, "Numerical Modeling of Skin Wound Closure with Interrupted Sutures," NanoBio Summit, University of Alabama at Birmingham (UAB), Birmingham, USA, 2015.
• A. Chanda, W. Upchurch, and V.U. Unnikrishnan, "Human Skin-Like Biofidelic Sutures," NanoBio Summit, University of Alabama at Birmingham (UAB), Birmingham, USA, 2015.
• A. Chanda, V. Unnikrishnan, S. Roy, H. E. Richter and M. E Lockhart, “Computational Modeling of the Mechanics of Progression of Anterior Vaginal Prolapse (AVP)” 13th U.S. National Congress for Computational Mechanics (USNCCM 13), San Diego, USA, 2015.
• A. Chanda and H. Ghoneim, “Pumping potential of Two-Layer-Left-Ventricle-Like Flexible Matrix Composite (FMC) Structure,” Proceedings of the 1st International Conference on Mechanics of Composites (MECHCOMP 2014), Stony Brook University, New York, USA, 2014.
• A. Chanda and P. Prajapati, “Finite Element Modeling and Cost Effective Analysis of Formula SAE Impact Attenuator Design,” 21st International Conference, SAE, University of Victoria, Melbourne, Australia, 2009.